TM 9-2320-365-34-2
13-18. FRAME MUFFLER SUPPORT BRACKET REPLACEMENT (CONT)
b. Installation.
NOTE
Front and rear frame muffler support brackets
are installed the same way. Front frame
muffler support bracket shown.
(1) Position frame muffler support bracket (1) on frame rail
(2) with two screws (3) and self-locking nuts (4).
(2) Tighten two self-locking nuts (4) to 62-76 lb-ft (84-103
N·m).
(3) Position clamp (5) on frame muffler support bracket (1)
with screw (6) and self-locking nut (7).
(4) Tighten self-locking nut (7) to 88-106 lb-in. (10-12 N·m).
c. Follow-On Maintenance.
(1) Install M1081 angle bracket (RH side) (para 13-10).
(2) Install 11K self-recovery winch (SRW), if equipped (para
16-2).
(3) Install heatshield and muffler (TM 9-2320-365-20-3).
End of Task.
13-88
