TM 9-2320-365-34-2
15-3. CAB FRONT SUPPORT REPLACEMENT/REPAIR (CONT)
(5) Position two lower resilient mounts (16) on front bumper
mounting brackets (15) with two bolts (17), washers (18),
and self-locking nuts (19).
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage your eyes. Wear safety goggles
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water
and
get
immediate
medical
attention. Failure to comply may result in
injury to personnel.
(6) Apply sealing compound to threads of shoulder bolt (20).
(7) Position shoulder bolt (20), washer (21), and nut (22) in
cab mounting bracket (1).
(8) Tighten two self-locking nuts (19) to 199-243 lb-ft (270-
330 N·m).
(9) Tighten nut (22) to 40-48 lb-ft (54-66 N·m).
(10) Perform steps (7) through (9) on right side cab mounting
bracket.
15-74
