TM 9-2320-365-34-2
16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR
(CONT)
(11) Check diameter of shoulder on shoulder shifter shaft (7).
Minimum diameter is 0.345 in. (0.88 cm).
(12) Check that shifter arm (8) is not broken or bent.
(13) Inspect shifter drive gear (9) for wear, pitting, or broken
teeth.
(14) Check ball bearing (10) for free rotation of inner race to
outer race.
(15) Check ball bearing (10) for pitting and corrosion.
(16) Inspect primary sun gear (11) for wear, pitting, or broken
teeth.
(17) Check bearing (12) for free rotation of inner race to outer
race.
(18) Check bearing (12) for pitting and corrosion.
(19) Inspect drum seal bore surface on motor end flange (13)
for scratches or pits.
16-10
