TM 9-2320-365-34-2
(14) Install oil seal (16) in valve body (14).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure to
comply may result in injury to personnel.
(15) Install washer (17) and retaining ring (18) in valve body
(14).
CAUTION
Ensure oil ports on valve body and housing are
aligned.
Failure to comply may result in
damage to equipment.
(16) Install gasket (19) and valve body (14) on housing (2).
(17) Position three screws (20) in valve body (14).
(18) Tighten three screws (20) to 16-20 lb-ft (22-27 N m).
(19) Install back-up ring (21) and retaining ring (22) on output
shaft (23).
(20) Position output shaft (23) in vise.
(21) Install inner clutch gear (24) on output shaft (23).
16-37
