TM 9-2320-365-34-2
WARNING
Adhesive
Sealant
MIL-S-46163
can
damage
your
eyes.
Wear
safety
goggles/glasses
when
using;
avoid
contact with eyes.
If sealant contacts
eyes, flush with water and get immediate
medical attention. Failure to comply may
result in injury to personnel.
NOTE
Perform steps (1.12) through (9) on PTO
Assembly (P/N 276XMF-JX-D5XK).
(1.12) Install four threaded studs (1) in PTO (2).
(2) Apply sealing compound to 90-degree fittings (3 and 4).
(3) Install preformed packing (5) on 90-degree fitting (3).
(4) Position 90-degree fitting (3) in PTO (2).
(5) Install preformed packing (6) on 90-degree fitting (4).
(6) Position 90-degree fitting (4) in transmission (7).
(7) Tighten 90-degree fittings (3 and 4) to 10-13 lb-ft (14-18
N·m).
NOTE
Step (8) requires the aid of an assistant.
(8) Position gasket (8) and PTO (2) on transmission (7) with
eight screws (9).
(9) Tighten eight screws (9) to 42-50 lb-ft (57-68 N·m).
16-40.2
Change 1
