TM 9-2320-365-34-2
17-2. SUSPENSION CYLINDER REPLACEMENT (CONT)
(4) Install suspension compression plate (7) on suspension
compression plate stud (8) with spring pin (9).
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
NOTE
Steps (5) through (8) require the aid of an
assistant.
(5) Position suspension cylinder (3) on frame rail (10) with
plate (11) and three screws (12).
(6) Tighten three screws (12) to 149-183 lb-ft (202-248
N·m).
(7) Position clamp (13) on frame rail (10) with screw (14),
and self-locking nut (15).
(8) Tighten self-locking nut (15) to 84-108 lb-in. (9-12 N·m).
17-6
Change 1
