TM 9-2320-365-34-2
18-2. M1078/M1079 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(9) Remove two collars (16) and bolts (17) from rear
crossmember (9). Discard collars and bolts.
NOTE
Left and right side L-brackets are removed
the same way. Right side shown.
(10) Remove screw (18), self-locking nut (19), and L-bracket
(20) from rear crossmember (9).
(11) Perform step (10) on left side L-bracket.
(12) Disconnect connector (21) from connector P58 (22).
(13) Remove nut (23), lockwasher (24), and terminal lug TL32
(25) from base (26).
18-4
Change 1
