TM 9-2320-365-34-2
18-2. M1078/M1079 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION
This task covers:
a. Installation
b. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Cargo bed removed, if equipped (para 15-8).
Van body removed, if equipped (TM 9-2320-365-20-4).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Socket, Socket Wrench (TM 9-2320-365-20)
Vise, Machinist (Item 72, Appendix B)
Drill, Electric, Portable (Item 18, Appendix B)
Tools and Special Tools (Cont)
Drill Set, Twist (Item 17, Appendix B)
Socket Set, Impact (Item 50, Appendix B)
Wrench, Impact, Electric (Item 77, Appendix B)
Sling, Cargo (Item 48, Appendix B)
Shop Equipment, Automotive Vehicle (Item 56,
TM 9-2320-366-20 Appendix B)
Materials/Parts
Ties, Cable, Plastic (Item 89, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 31, Appendix C)
Personnel Required
(3)
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
a. Installation.
NOTE
• Remove plastic cable ties as required.
• Tag air hoses and connection points prior to
disconnecting.
(1) Disconnect air hose (1) from 90-degree fitting (2).
(2) Disconnect air hose (3) from 45-degree fitting (4).
18-2
Change 1
