TM 9-2320-365-34-2
18-2. M1078/M1079 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT)
WARNING
Pintle
hook
extension
weighs
approximately 90 lbs (41 kgs). Attach a
suitable lifting device prior to installation.
Failure to comply may result in injury to
personnel or damage to equipment.
NOTE
Step (34) requires the aid of two assistants.
Use bolts P/N 12414307-142 and self-locking
nuts P/N 12414308-025 on step (34).
(34) Position pintle hook extension (37) on rear crossmember
(9) with four bolts (54) and self-locking nuts (55).
NOTE
Use bolts P/N 12414307-143 and self-locking
nuts P/N 12414308-025 on step (35).
Steps (35) through (40) require the aid of an
assistant.
(35) Position two bolts (38) and self-locking nuts (39) in pintle
hook extension (37).
(36) Tighten four self-locking nuts (55) and two self-locking
nuts (39) to 196-240 lb-ft (265-325 N·m).
NOTE
Use bolts P/N 12414307-141 and self-locking
nuts P/N 12414308-025 on step (37).
(37) Position two bolts (56) and self-locking nuts (57) in rear
lower crossmember support (41).
(38) Tighten two self-locking nuts (43 and 57) to 196-240 lb-ft
(265-325 N·m).
(39) Tighten six self-locking nuts (51) to 76-94 lb-ft (103-125
N·m).
(40) Tighten two bolts (47 and 48) to 236-288 lb-ft (319-389
N·m).
18-8
Change 1
