TM 9-2320-365-34-2
9-2. FRONT AXLE ASSEMBLY REPLACEMENT (CONT)
NOTE
Perform steps (25) and (26) on replacement
front axle assembly.
(25) Remove 10 protective covers (38) from front axle
assembly (8).
(26) Remove nuts (39 and 40) and bracket (41) from front
axle assembly (8).
NOTE
Perform steps (27) and (28) on old front axle
assembly.
(27) Install bracket (41) on front axle assembly (8) with nuts
(39 and 40).
(28) Install 10 protective covers (38) on front axle assembly
(8).
b. Installation.
NOTE
Perform steps (1) through (3) on left and right
sides of front axle assembly if replacement
front axle assembly is not equipped with
brackets on steering knuckles.
(1) Remove screw (1) and washer (2) from steering knuckle
(3).
(2) Position bracket (4) on steering knuckle (3) with washer
(5), washer (2), and screw (1).
(3) Tighten screw (1) to 500-650 lb-ft (678-881 N·m).
9-6