TM 9-2320-365-34-2
Section II. MAINTENANCE PROCEDURES
9-2. FRONT AXLE ASSEMBLY REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Air tanks drained (TM 9-2320-365-10).
Gravel deflector and gravel deflector extensions
removed (TM 9-2320-365-20-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Wrench Set, Socket (Item 74, Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)
Multiplier, Torque Wrench (Item 35, Appendix B)
Trestle, Motor Vehicle Maintenance (2) (Item 71,
Appendix B)
Lift, Transmission/Differential (Item 32, Appendix B)
Jack, Dolly Type, Hydraulic (Item 31, Appendix B)
Socket, Left Front Leaf Spring U-Bolt (Item 8,
Appendix D)
Puller Kit, Universal (Item 44, Appendix B)
Hammer, Hand, Soft Head (Item 28, Appendix B)
Tools and Special Tools (Cont)
Puller, Mechanical (Item 45, Appendix B)
Sling, Cargo (Item 48, Appendix B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 31, Appendix C)
Nut, Self-Locking (2) (Item 126, Appendix F)
Pin, Cotter (2) (Item 227, Appendix F)
Nut, Self-Locking (8) (Item 124, Appendix F)
Washer (2) (Item 294, Appendix F)
Bracket (2, if required) (Item 16, Appendix F)
Washer, Brake Housing (2, if required) (Item
296, Appendix F)
Screw, Self-locking (4) (Item 251.1, Appendix F)
U-bolt (4) (Item 15.1, Appendix F)
Personnel Required
(3)
WARNING
Wear appropriate eye protection when
working under vehicle due to possibility
of falling debris. Failure to comply may
result in injury to personnel.
a. Removal.
(1) Deleted
(2) Deleted
9-2
Change 1
