TM 9-2320-365-34-2
7-8. ROTATING CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR (CONT)
d. Assembly.
(1) Install preformed packings (1 and 2) on solenoid (3).
WARNING
Use care when installing springs. Springs
are under tension and can act as
projectiles when released. Failure to
comply may result in injury to personnel.
CAUTION
Retaining pins are installed from bottom of
solenoid body. Failure to comply may result in
damage to equipment.
(2) Install spring (4), regulator valve (5), and solenoid (3)
in rotating clutch valve body (6) with retaining pin (7).
(3) Perform steps (1) and (2) on remaining two solenoids
(3).
(4) Install preformed packing (8) on pressure switch (9).
(5) Position pressure switch (9) on rotating clutch valve
body (6) with two screws (10).
(6) Tighten two screws (10) to 48-72 lb-in. (5-8 N·m).
7-60
