TM 9-2320-365-34-2
7-8. ROTATING CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transmission internal wiring harness removed (para 7-
13).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B)
Multimeter, Digital (Item 34, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Gloves, Rubber (Item 23, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Materials/Parts
Rag, Wiping (Item 59, Appendix C)
Seal, Non-Metallic (Item 259, Appendix F)
Filter Element (3) (Item 25, Appendix F)
Packing, Preformed (Item 173, Appendix F)
Packing, Preformed (2) (Item 174, Appendix F)
Packing, Preformed (2) (Item 176, Appendix F)
Packing, Preformed (Item 175, Appendix F)
Packing, Preformed (Item 168, Appendix F)
Solvent, Dry Cleaning (Item 81, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 31, Appendix C)
a. Removal.
(1) Remove three bolts (1) from rotating clutch valve body
(2).
(2) Remove rotating clutch valve body (2) from main valve
body (3).
b. Disassembly.
NOTE
Rotating clutch solenoid assembly contains
parts which cannot be interchanged. Tag all
parts prior to removal.
(1) Remove seal (1) from rotating clutch valve body (2).
Discard seal.
(2) Remove three solenoid filter screens (3) from rotating
clutch valve body (2). Discard solenoid filter screens.
7-57
