TM 9-2320-365-34-2
10-2. REAR AXLE ASSEMBLY REPLACEMENT (CONT)
NOTE
Perform steps (28) and (29) on replacement
rear axle assembly.
(28) Remove 10 protective covers (40) from rear axle
assembly (3).
(29) Remove nuts (41 and 42) and bracket (43) from rear
axle assembly (3).
NOTE
Perform steps (30) and (31) on old rear axle
assembly.
(30) Install bracket (43) on rear axle assembly (3) with nuts
(41 and 42).
(31) Install 10 protective covers (40) on rear axle assembly
(3).
b. Installation.
WARNING
Rear axle assembly weighs approximately
1580 lbs (717 kgs). Rear axle assembly
must be supported on a transmission/
differential lift during installation. Failure
to comply may result in injury to
personnel or damage to equipment.
NOTE
Left and right sides of rear axle assembly are
installed the same way. Left side shown.
(1) Position rear axle assembly (1) on transmission/
differential lift and secure with chain.
(2) Install 90-degree fittings (2, 3, and 4) on front air
chamber (5).
10-6
Change 1
