TM 9-2320-365-34-2
12-3. STEERING GEAR ASSEMBLY ADJUSTMENT (CONT)
(5) Raise cab (TM 9-2320-365-10).
(6) Disconnect supply hose (8) from adapter (9).
(7) Install tee fitting (10) on adapter (9).
(8) Install snubber (11) in tee fitting (10).
(9) Install pressure transducer (12) in snubber (11).
(10) Connect supply hose (8) to tee fitting (10).
(11) Connect test cable (13) to pressure transducer (12).
(12) Check power steering reservoir fluid level
(TM 9-2320-365-10).
CAUTION
Ensure cab does not damage tee fitting or
pinch hoses when lowered.
Failure to
comply may result in damage to equipment.
NOTE
Step (13) requires the aid of assistant.
(13) Lower cab (TM 9-2320-365-10).
(14) Connect test cable (13) to DCA connector (14).
(15) Perform STE/ICE-R Test 50 (TM 9-4910-571-12&P).
12-10
