TM 9-2320-365-34-2
CAUTION
Cap or plug hoses and disconnection points
to prevent contamination of pneumatic
system.
Failure to comply may result in
damage to equipment.
NOTE
• Tag hoses and connection points prior to
disconnecting.
• Remove plastic cable ties as required.
(6) Disconnect hose (27) from 90-degree fitting (28).
(7) Remove nut (29) and 90-degree fitting (28) from frame
rail (4).
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
(8) Remove three collars (30) and bolts (31) from bracket
(32). Discard collars and bolts.
(9) Remove three self-locking nuts (33), six washers (34),
three screws (35), and bracket (36) from valve panel
(37). Discard self-locking nuts.
13-19
