TM 9-2320-365-34-2
13-6. REAR CROSSMEMBER REPLACEMENT (CONT)
CAUTION
When removing bolts, continuous removal of
collars is mandatory. Failure to comply will
result in seizing of collar to bolt.
NOTE
• Left and right side of rear crossmember is
removed the same way. Left side shown.
• Steps (5) through (8) require the aid of an
assistant.
(5) Remove collar (9) and bolt (10) from rear crossmember
(5). Discard collar and bolt.
(6) Remove five collars (11) and bolts (12) from rear
crossmember (5). Discard collars and bolts.
(7) Perform steps (5) and (6) on right side of rear
crossmember (5).
(8) Remove rear crossmember (5) from vehicle.
b. Installation.
NOTE
• Left and right side of rear crossmember is
installed the same way. Left side shown.
• Steps (1) through (4) require the aid of an
assistant.
(1) Position rear crossmember (1) on vehicle with five bolts
(2) and self-locking nuts (3).
(2) Tighten five self-locking nuts (3) to 210-225 lb-ft (285-
305 N·m).
13-14
