TM 9-2320-365-34-2
NOTE
Perform steps (14.1) and (14.5) on PTO
Assembly (P/N 12378814-001).
(14.1) Disconnect tube (21.1) from tee fitting (21.2).
(14.2) Remove tube (21.1) from 90-degree fitting (21.3).
NOTE
Note orientation of tee fitting and 90-degree
fitting.
(14.3) Remove tee fitting (21.2) from PTO (3).
(14.4) Remove 90-degree fitting (21.3) from PTO (3).
(14.5) Remove preformed packing (21.4) from 90-degree fitting
(21.3).
(14) Deleted.
b. Disassembly.
(1) Remove oil seal (1) from bearing cap (2). Discard oil
seal.
(2) Remove four screws (3) from bearing cap (2).
(3) Remove bearing cap (2) and gasket (4) from housing
(5). Discard gasket.
(4) Remove solenoid electrical connector (6) from housing
(5).
Change 1
16-29
