TM 9-2320-365-34-2
16-6. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT)
(6) Remove four screws (9) and two bearing cups (10) from
yoke (11). Discard screws.
(7) Slide drive shaft (12) from side to side and separate
universal joint (13) from yoke (11).
NOTE
Step (8) requires the aid of an assistant.
(8) Attach drive shaft (12) to frame (14).
(9) Remove 90-degree fitting (5) from transmission (15).
(10) Remove preformed packing (16) from fitting (5). Discard
preformed packing.
NOTE
Step (11) requires the aid of an assistant.
(11) Remove eight screws (17), PTO (3), and gasket (18)
from transmission (15). Discard gasket.
NOTE
Perform steps (12) and (13) on PTO
Assembly (P/N 276XMF-JX-D5XK).
(12) Remove 90-degree fitting (19) from PTO (3).
(13) Remove preformed packing (20) from fitting (19).
Discard preformed packing.
(14) Remove four threaded studs (21) from PTO (3).
16-28.2
Change 1
