TM 9-2320-365-34-2
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to comply may result in injury to
personnel.
(15) Remove retaining ring (21), thrust washer (22), and outer
clutch gear (23) from output shaft (8).
(16) Remove needle bearing (24) from outer clutch gear (23).
(17) Remove inner clutch gear (25) from output shaft (8).
(18) Remove retaining ring (26) and back-up ring (27) from
output shaft (8).
(19) Remove three screws (28), valve body (29), and gasket
(30) from housing (5). Discard gasket.
(20) Remove retaining ring (31) and washer (32) from valve
body (29).
(21) Remove oil seal (33) from valve body (29). Discard oil
seal.
16-31
