TM 9-2320-365-34-2
16-6. POWER TAKEOFF (PTO) REPLACEMENT/REPAIR (CONT)
(22) Remove four screws (34) from valve cap (35).
(23) Remove valve cap (35) from valve body (29).
(24) Remove solenoid valve (36) from valve body (29).
(25) Remove block ring (37) from valve cap (35). Discard
block ring.
NOTE
Perform step (26) on PTO Assembly (P/N
276MS-JX-D5XK).
(26) Remove plug (38), washer (39), preformed packing (40)
and preformed packing (40.1) from housing (5). Discard
preformed packings .
NOTE
Perform step (26.1) on PTO Assembly (P/N
12378814-001).
(26.1) Remove plug (38) and preformed packing (40) from
housing (5). Discard preformed packing.
NOTE
Perform steps (27) through (29) on PTO
Assembly (P/N 276XMF-JX-D5XK).
(27) Remove idler shaft (41) from housing (5).
(28) Remove preformed packing (42) from idler shaft (41).
Discard preformed packing.
(29) Remove input gear (43), two thrust washers (44), and
bearings (45) from housing (5).
16-32
Change 1
