TM 9-2320-365-34-2
7-7. STATIONARY CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Cleaning/Inspection
d. Assembly
e. Installation
f. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transmission internal wiring harness removed (para 7-
13)
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B)
Multimeter, Digital (Item 34, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Gloves, Rubber (Item 23, Appendix B)
Wrench Set, Socket (Item 75, Appendix B)
Materials/Parts
Rag, Wiping (Item 59, Appendix C)
Filter Element (3) (Item 25, Appendix F)
Seal, Non-Metallic (2) (Item 259, Appendix F)
Packing, Preformed (3) (Item 174, Appendix F)
Packing, Preformed (3) (Item 176, Appendix F)
Solvent, Dry Cleaning (Item 81, Appendix C)
Dispenser, Pressure Sensitive Adhesive Tape
(Item 31, Appendix C)
a. Removal.
Remove eight screws (1) and clutch valve body (2)
from main valve body (3).
b. Disassembly.
NOTE
Stationary clutch solenoid contains parts
which cannot be interchanged. Tag all
parts prior to removal.
(1) Remove two face seals (1) from clutch valve body (2).
Discard face seals.
(2) Remove three filter screens (3) from clutch valve body
(2). Discard filter screens.
7-53
