TM 9-2320-365-34-2
12-2.
STEERING GEAR REPLACEMENT (CONT)
WARNING
Steering
gear
assembly
weighs
approximately 130 lbs (59 kgs). Support
steering gear assembly on jack before
dismounting from chassis.
Failure to
comply can cause injury to personnel or
damage to equipment.
NOTE
• Bolts removed in steps (10) and (11) are
different lengths. Tag bolts and mark locations
for ease during installation.
• Steps (9) through (12) require the aid of an
assistant.
(9) Place jack under steering gear assembly (14).
(10) Remove self-locking nut (15) and bolt (16) from bracket
(17). Discard self-locking nut.
(11) Remove five self-locking nuts (18) and bolts (19) from
bracket (17). Discard self-locking nuts.
(12) Remove steering gear assembly (14) from vehicle.
(13) Place steering gear assembly (14) in vise.
NOTE
Bolts removed in steps (14) and (15) are
different lengths.
Tag bolts and mark
locations for ease during installation.
(14) Remove bolt (20) from bracket (21).
(15) Remove three bolts (22) from bracket (21).
(16) Remove bracket (21) from steering gear assembly (14).
12-4
