TM 9-2320-365-34-2
(17) Remove supply port adapter (5) from steering gear
assembly (14).
(18) Remove nut (23) and steering pitman arm (24) from
output shaft (25).
(19) Remove steering gear assembly (14) from vise.
b. Installation.
(1) Position steering gear assembly (1) in vise.
CAUTION
Ensure marks on steering gear output shaft
and pitman arm are aligned.
Failure to
comply may result in damage to equipment.
(2) Install steering pitman arm (2) on output shaft (3).
(3) Position nut (4) on output shaft (3).
(4) Tighten nut (4) to 365-446 lb-ft (495-605 N m).
(5) Stake nut (4) to output shaft (3) at a minimum depth of
0.1 in. (2.5 mm).
(6) Install supply port adapter (5) in steering gear assembly
(1).
12-5
